checking in debug stuff for the hw pwm issue #17

test/pwmtest.py

@@ -0,0 +1,97 @@
+#!/usr/bin/python
+
+import CHIP_IO.PWM as PWM
+import CHIP_IO.GPIO as GPIO
+import CHIP_IO.OverlayManager as OM
+import time
+import datetime
+import threading
+
+class PWMReceiver(threading.Thread):
+    def __init__(self,gpio,key,maxcount=20,sleeptime=0.5):
+        self.gpio = gpio
+        self.key = key
+        self.counter = 0
+        self.maxcount = maxcount
+        self.sleeptime = sleeptime
+        threading.Thread.__init__(self)
+
+    def run(self):
+        print("SETTING UP RECEIVER GPIO")
+        self.gpio.cleanup()
+        self.gpio.setup(self.key, self.gpio.IN)
+        print("STARTING RECEIVE LOOP")
+        try:
+            while self.counter < self.maxcount:
+                pwmval = self.gpio.input(self.key)
+                print("PWM VALUE: {0} @ {1}".format(pwmval, datetime.datetime.now()))
+                time.sleep(self.sleeptime)
+                self.counter += 1
+        except KeyboardInterrupt:
+            self.gpio.cleanup(self.key)
+
+def PrintPwmData():
+    print("PRINTING PWM SYSFS DATA")
+    f = open("/sys/class/pwm/pwmchip0/pwm0/enable")
+    print("PWM0 ENABLE:\t{}".format(f.readline()))
+    f.close()
+    f = open("/sys/class/pwm/pwmchip0/pwm0/period")
+    print("PWM0 PERIOD:\t{}".format(f.readline()))
+    f.close()
+    f = open("/sys/class/pwm/pwmchip0/pwm0/duty_cycle")
+    print("PWM0 DUTY CYCLE:\t{}".format(f.readline()))
+    f.close()
+    f = open("/sys/class/pwm/pwmchip0/pwm0/polarity")
+    print("PWM0 POLARITY:\t{}".format(f.readline()))
+    f.close()
+
+if __name__ == "__main__":
+    # SETUP VARIABLES
+    PWMGPIO = "PWM0"
+    RECEIVERGPIO = "CSID0"
+    COUNT = 50
+    SLEEPTIME = 0.01
+
+    # LOAD THE PWM OVERLAY
+    print("LOADING PWM OVERLAY")
+    OM.load("PWM0")
+
+    time.sleep(1)
+
+    # CLEANUP THE GPIO
+    GPIO.cleanup()
+    PWM.cleanup()
+
+    # SETUP PWM
+    try:
+        print("PWM START")
+        PWM.start(PWMGPIO, 35, 20, 0)
+        PrintPwmData()
+
+        # UNCOMMENT FOR CRASH
+        #print("PWM SET FREQUENCY")
+        #PWM.set_frequency(PWMGPIO, 200)
+        #PrintPwmData()
+
+        # UNCOMMENT FOR CRASH
+        #print("PWM SET DUTY CYCLE")
+        #PWM.set_duty_cycle(PWMGPIO, 25)
+        #PrintPwmData()
+
+        # SETUP PWM RECEIVER
+        rcvr = PWMReceiver(GPIO, RECEIVERGPIO, COUNT, SLEEPTIME)
+        rcvr.start()
+
+        time.sleep(COUNT*SLEEPTIME + 1)
+
+    except:
+        raise
+    finally:
+        # CLEANUP
+        print("CLEANUP")
+        PWM.stop(PWMGPIO)
+        PWM.cleanup()
+        #OM.unload("PWM0")
+        GPIO.cleanup()
+
+