Closing out Issue #68 by adding 3 CHIP Pro pins able to be used as interrupts

CHANGELOG.rst

@@ -1,3 +1,34 @@
+0.5.8
+---
+* Added 3 pins for the CHIP Pro as allowable for setting callbacks and edge detection to close out Issue #68
+
+0.5.7
+---
+* Added the I2S pins on the CHIP Pro as GPIO capable
+* Added per PWM/SoftPWM cleanup per Issue #64
+
+0.5.6
+---
+* Fix for Issue #63 where re-setting up a pin wasn't lining up with RPi.GPIO standards. Calling setup after the first time will now update direction.
+* README updates to point out the direction() function since that was missing
+
+0.5.5
+---
+* Fix for Issue #62 where using alternate name of an XIO would cause a segfault due to trying to set pull up/down resistor setting
+
+0.5.4
+---
+* Re-enabled the polarity setting for PWM based upon Issue #61
+* Fixed a 1 letter bug was trying to write inverted to polarity when it wants inversed (such facepalm)
+* Cleaned up the polarity setting code to work when PWM is not enabled
+* Fixed the unit test for pwm to verify we can set polarity
+
+0.5.3
+---
+* Fixes to the PWM pytest
+* Added pytest for LRADC and Utilities
+* Makefile updates for all the things
+
 0.5.2
 ---
 * Updating Utilties to determine CHIP Pro better

CHIP_IO/OverlayManager.py

@@ -20,7 +20,8 @@
 import os
 import shutil
 import time
-import Utilities as UT
+import sys
+from .Utilities import is_chip_pro
 
 DEBUG = False
 
@@ -162,7 +163,7 @@ def load(overlay, path=""):
             return 1
 
         # DETERMINE IF WE ARE A CHIP PRO AND WE ARE COMMANDED TO LOAD PWM0
-        if UT.is_chip_pro() and overlay.upper() == "PWM0":
+        if is_chip_pro() and overlay.upper() == "PWM0":
             print("CHIP Pro supports PWM0 in base DTB, exiting")
             return 1
 
@@ -200,7 +201,7 @@ def unload(overlay):
         print("UNLOAD OVERLAY: {0}".format(overlay))
     
     # DETERMINE IF WE ARE A CHIP PRO AND WE ARE COMMANDED TO UNLOAD PWM0
-    if UT.is_chip_pro() and overlay.upper() == "PWM0":
+    if is_chip_pro() and overlay.upper() == "PWM0":
         print("CHIP Pro supports PWM0 in base DTB, exiting")
         return
     

Makefile

@@ -1,25 +1,61 @@
+# PyPi Packaging
 package: clean
+	@echo " ** PACKAGING FOR PYPI **"
 	python setup.py sdist
 
+# PyPi Publishing
 publish: package
+	@echo " ** UPLOADING TO PYPI **"
 	twine upload dist/*
 
+# Clean all the things
 clean:
+	@echo " ** CLEANING CHIP_IO **"
 	rm -rf CHIP_IO.* build dist
 	rm -f *.pyo *.pyc
 	rm -f *.egg
 	rm -rf __pycache__
+	rm -rf test/__pycache__/
 	rm -rf debian/python-chip-io*
 	rm -rf debian/python3-chip-io*
 
-tests:
-	py.test
+# Run all the tests
+tests: pytest2 pytest3
 
+# Run the tests with Python 2
+pytest2:
+	@echo " ** RUNING CHIP_IO TESTS UNDER PYTHON 2 **"
+	pushd test; python -m pytest; popd
+
+# Run the tests with Python 3
+pytest3:
+	@echo " ** RUNING CHIP_IO TESTS UNDER PYTHON 3 **"
+	pushd test; python3 -m pytest; popd
+
+# Build all the things
 build:
+	@echo " ** BUILDING CHIP_IO: PYTHON 2 **"
 	python setup.py build --force
 
+# Install all the things
 install: build
+	@echo " ** INSTALLING CHIP_IO: PYTHON 2 **"
 	python setup.py install --force
 
+# Build for Python 3
+build3:
+	@echo " ** BUILDING CHIP_IO: PYTHON 3 **"
+	python3 setup.py build --force
+
+# Install for Python 3
+install3: build3
+	@echo " ** INSTALLING CHIP_IO: PYTHON 3 **"
+	python3 setup.py install --force
+
+# Install for both Python 2 and 3
+all: install install3
+
+# Create a deb file
 debfile:
+	@echo " ** BUILDING DEBIAN PACKAGES **"
 	dpkg-buildpackage -rfakeroot -uc -b

README.rst

@@ -225,6 +225,16 @@ Read lots of data::
 
 This code was initially added by brettcvz and I cleaned it up and expanded it.
 
+You can quickly change a pins direction::
+
+    GPIO.direction("XIO-P3", GPIO.OUT)
+    GPIO.direction("XIO-P3", GPIO.IN)
+    
+You can also re-setup a pin in order to change direction, not that this is a slower operation::
+
+    GPIO.setup("XIO-P3", GPIO.OUT)
+    GPIO.setup("XIO-P3", GPIO.IN)
+
 The edge detection code below only works for the AP-EINT1, AP-EINT3, and XPO Pins on the CHIP.
 
 Waiting for an edge (GPIO.RISING, GPIO.FALLING, or GPIO.BOTH::
@@ -240,19 +250,21 @@ Detecting events::
     if GPIO.event_detected("XIO-P0"):
         print "event detected!"
 
-CHIP_IO can also handle adding callback functions on any pin that supports edge detection.::
+CHIP_IO can also handle adding callback functions on any pin that supports edge detection.  Note that only one callback function can be specified per Pin, if you try to set more, an exception will be thrown.::
 
     def mycallback(channel):
         print("we hit the edge we want")
 
     GPIO.setup("GPIO3", GPIO.IN)
-    # Add Callback: Falling Edge
-    GPIO.add_event_callback("GPIO3", GPIO.FALLING, mycallback)
-    # Add Callback: Rising Edge
-    GPIO.add_event_callback("GPIO3", GPIO.RISING, mycallback)
-    # Add Callback: Both Edges
-    GPIO.add_event_callback("GPIO3", GPIO.BOTH, mycallback)
-    # Remove callback
+    # Add Event Detect and Callback Separately for Falling Edge
+    GPIO.add_event_detect("GPIO3", GPIO.FALLING)
+    GPIO.add_event_callback("GPIO3", mycallback)
+    # Add Event Detect and Callback Separately for Rising Edge
+    GPIO.add_event_detect("GPIO3", GPIO.RISING)
+    GPIO.add_event_callback("GPIO3", mycallback)
+    # Add Callback for Both Edges using the add_event_detect() method
+    GPIO.add_event_detect("GPIO3", GPIO.BOTH, mycallback)
+    # Remove callback with the following
     GPIO.remove_event_detect("GPIO3")
 
 
@@ -438,11 +450,12 @@ Install py.test to run the tests. You'll also need the python compiler package f
 To run the tests, do the following.::
 
     # If only one version of Python is installed
-    sudo py.test
-    # If more than one version of Python
-    cd test
-    sudo python2 -m pytest
-    sudo python3 -m pytest
+    # Python 2
+    sudo make pytest2
+    # Python 3
+    sudo make pytest3
+    # If more than one version of Python, run through both
+    sudo make test
 
 **Credits**
 

debian/changelog

@@ -1,3 +1,47 @@
+chip-io (0.5.8-1) unstable; urgency=low
+
+  * Added 3 pins for the CHIP Pro as allowable for setting callbacks and edge
+    detection to close out Issue #68
+
+ -- Robert Wolterman <robert.wolterman@gmail.com>  Tue, 02 May 2017 22:43:00 -0600
+
+chip-io (0.5.7-1) unstable; urgency=low
+
+  * Added the I2S pins on the CHIP Pro as GPIO capable
+  * Added per PWM/SoftPWM cleanup per Issue #64
+
+ -- Robert Wolterman <robert.wolterman@gmail.com>  Mon, 01 May 2017 22:47:00 -0600
+
+chip-io (0.5.6-1) unstable; urgency=low
+
+  * Fix for Issue #63 where re-setting up a pin wasn't lining up with RPi.GPIO standards. Calling setup after the first time will now update direction.
+  * README updates to point out the direction() function since that was missing
+
+ -- Robert Wolterman <robert.wolterman@gmail.com>  Mon, 20 Mar 2017 23:04:00 -0600
+
+chip-io (0.5.5-1) unstable; urgency=low
+
+  * Fix for Issue #62 where using alternate name of an XIO would cause a segfault due to trying to set pull up/down resistor setting
+
+ -- Robert Wolterman <robert.wolterman@gmail.com>  Mon, 6 Mar 2017 17:02:00 -0600
+
+chip-io (0.5.4-1) unstable; urgency=low
+
+  * Re-enabled the polarity setting for PWM based upon Issue #61
+  * Fixed a 1 letter bug was trying to write inverted to polarity when it wants inversed (such facepalm)
+  * Cleaned up the polarity setting code to work when PWM is not enabled
+  * Fixed the unit test for pwm to verify we can set polarity
+
+ -- Robert Wolterman <robert.wolterman@gmail.com>  Sat, 4 Mar 2017 20:46:00 -0600
+
+chip-io (0.5.3-1) unstable; urgency=low
+
+  * Fixes to the PWM pytest
+  * Added pytest for LRADC and Utilities
+  * Makefile updates for all the things
+
+ -- Robert Wolterman <robert.wolterman@gmail.com>  Sun, 26 Feb 2017 20:46:00 -0600
+
 chip-io (0.5.2-1) unstable; urgency=low
 
   * Updating Utilities to determine CHIP Pro better

debian/files

@@ -1,2 +1,2 @@
-python-chip-io_0.4.0-1_armhf.deb python optional
-python3-chip-io_0.4.0-1_armhf.deb python optional
+python-chip-io_0.5.7-1_armhf.deb python optional
+python3-chip-io_0.5.7-1_armhf.deb python optional

setup.py

@@ -13,7 +13,7 @@ classifiers = ['Development Status :: 3 - Alpha',
                'Topic :: System :: Hardware']
 
 setup(name             = 'CHIP_IO',
-      version          = '0.5.2',
+      version          = '0.5.8',
       author           = 'Robert Wolterman',
       author_email     = 'robert.wolterman@gmail.com',
       description      = 'A module to control CHIP IO channels',

source/c_pwm.c

@@ -246,13 +246,14 @@ int pwm_set_polarity(const char *key, int polarity) {
         return rtnval;
     }
 
-    if (pwm->enable) {
+    // THIS ONLY WORKS WHEN PWM IS NOT ENABLED
+    if (pwm->enable == 0) {
         if (polarity == 0) {
             len = snprintf(buffer, sizeof(buffer), "%s", "normal"); BUF2SMALL(buffer);
         }
         else
         {
-            len = snprintf(buffer, sizeof(buffer), "%s", "inverted"); BUF2SMALL(buffer);
+            len = snprintf(buffer, sizeof(buffer), "%s", "inversed"); BUF2SMALL(buffer);
         }
         ssize_t s = write(pwm->polarity_fd, buffer, len);  e_no = errno;
         if (DEBUG) {
@@ -271,6 +272,7 @@ int pwm_set_polarity(const char *key, int polarity) {
     } else {
         rtnval = 0;
     }
+
     return rtnval;
 }
 
@@ -527,12 +529,12 @@ int pwm_start(const char *key, float duty, float freq, int polarity)
     }
 
     int rtnval = 0;
-    // Always set polarity first
-    if (iscpro == 1) {
-        rtnval = pwm_set_polarity(key, polarity);
-    }
-    rtnval = pwm_set_enable(key, ENABLE);
     // Fix for issue #53
+    // Always set polarity first
+    rtnval = pwm_set_polarity(key, polarity);
+    if (rtnval != -1) {
+        rtnval = 0;
+        rtnval = pwm_set_enable(key, ENABLE);
         if (rtnval != -1) {
             rtnval = 0;
             rtnval = pwm_set_frequency(key, freq);
@@ -541,6 +543,7 @@ int pwm_start(const char *key, float duty, float freq, int polarity)
                 rtnval = pwm_set_duty_cycle(key, duty);
             }
         }
+    }
     return rtnval;
 }
 
@@ -563,9 +566,7 @@ int pwm_disable(const char *key)
     pwm_set_frequency(key, 0);
     pwm_set_duty_cycle(key, 0);
     pwm_set_enable(key, DISABLE);
-    if (pwm->iscpro == 1) {
     pwm_set_polarity(key, 0);
-    }
 
     if ((fd = open("/sys/class/pwm/pwmchip0/unexport", O_WRONLY)) < 0)
     {

source/common.c

@@ -138,6 +138,11 @@ pins_t pins_info[] = {
   { "CSID7",     "D7",          "U14_38", 139, BASE_METHOD_AS_IS, -1, -1, BOTH},
   { "GND",       "GND",         "U14_39",  -1, BASE_METHOD_AS_IS, -1, -1, BOTH},
   { "GND",       "GND",         "U14_40",  -1, BASE_METHOD_AS_IS, -1, -1, BOTH},
+  { "I2S-MCLK",  "EINT19",      "21",      37, BASE_METHOD_AS_IS, -1, -1, CHIPPRO},
+  { "I2S-BCLK",  "I2S-BCLK",    "22",      38, BASE_METHOD_AS_IS, -1, -1, CHIPPRO},
+  { "I2S-LCLK",  "I2S-LCLK",    "23",      39, BASE_METHOD_AS_IS, -1, -1, CHIPPRO},
+  { "I2S-DO",    "I2S-DO",      "24",      40, BASE_METHOD_AS_IS, -1, -1, CHIPPRO},
+  { "I2S-DI",    "EINT24",      "25",      41, BASE_METHOD_AS_IS, -1, -1, CHIPPRO},
   { NULL,        NULL,          NULL,      -1, 0,                 -1, -1, -1}
 };
 
@@ -263,7 +268,7 @@ int gpio_allowed(int gpio)
             // We have a CHIP and the pin is for CHIP/BOTH
             if (((p->sbc_type == CHIP) || (p->sbc_type == BOTH)) && (is_this_chippro() == 0)) {
                 if (DEBUG)
-                    printf(" ** gpio_allowed: pin allowed for chip or bth and we're a chip\n");
+                    printf(" ** gpio_allowed: pin allowed for chip or both and we're a chip\n");
                 rtnval = 1;
             // We have a CHIP Pro and the pin is for CHIPPRO/BOTH
             } else if (((p->sbc_type == CHIPPRO) || (p->sbc_type == BOTH)) && (is_this_chippro() == 1)) {
@@ -296,7 +301,7 @@ int pwm_allowed(const char *key)
             // We have a CHIP and the pin is for CHIP/BOTH
             if ((p->sbc_type == BOTH) && (is_this_chippro() == 0)) {
                 if (DEBUG)
-                    printf(" ** pwm_allowed: pwm allowed for chip or bth and we're a chip\n");
+                    printf(" ** pwm_allowed: pwm allowed for chip or both and we're a chip\n");
                 rtnval = 1;
             // We have a CHIP Pro and the pin is for CHIPPRO/BOTH
             } else if (((p->sbc_type == CHIPPRO) || (p->sbc_type == BOTH)) && (is_this_chippro() == 1)) {
@@ -554,7 +559,7 @@ int compute_port_pin(const char *key, int gpio, int *port, int *pin)
     if (capable < 0) {
         capable = lookup_pud_capable_by_name(key);
         if (capable < 0) {
-             capable = lookup_gpio_by_altname(key);
+             capable = lookup_pud_capable_by_altname(key);
              if (capable < 0) {
                  capable = 0;  // default to false
              }

source/constants.c

@@ -85,6 +85,6 @@ void define_constants(PyObject *module)
    bcm = Py_BuildValue("i", BCM);
    PyModule_AddObject(module, "BCM", bcm);
 
-   version = Py_BuildValue("s", "0.5.2");
+   version = Py_BuildValue("s", "0.5.8");
    PyModule_AddObject(module, "VERSION", version);
 }

source/event_gpio.c

@@ -177,7 +177,7 @@ int gpio_export(int gpio)
         char err[256];
         snprintf(err, sizeof(err), "gpio_export: could not write '%s' to %s (%s)", str_gpio, filename, strerror(e_no));
         add_error_msg(err);
-        return -1;
+        return -2;
     }
 
     // add to list

source/py_gpio.c

@@ -215,11 +215,16 @@ static PyObject *py_setup_channel(PyObject *self, PyObject *args, PyObject *kwar
         init_r8_gpio_mem();
     }
  
-    if (gpio_export(gpio) < 0) {
+    int exprtn = gpio_export(gpio);
+    if (exprtn == -1) {
         char err[2000];
         snprintf(err, sizeof(err), "Error setting up channel %s, maybe already exported? (%s)", channel, get_error_msg());
         PyErr_SetString(PyExc_RuntimeError, err);
         return NULL;
+    } else if (exprtn == -2 && gpio_warnings) {
+        char warn[2000];
+        snprintf(warn, sizeof(warn), "Channel %s may already be exported, proceeding with rest of setup", channel);
+        PyErr_WarnEx(PyExc_Warning, warn, 1);
     }
     if (gpio_set_direction(gpio, direction) < 0) {
         char err[2000];
@@ -591,6 +596,9 @@ static PyObject *py_add_event_callback(PyObject *self, PyObject *args, PyObject
    // check to ensure gpio is one of the allowed pins
    if (gpio != lookup_gpio_by_name("AP-EINT3")
        && gpio != lookup_gpio_by_name("AP-EINT1")
+       && gpio != lookup_gpio_by_name("I2S-MCLK") // CHIP PRO
+       && gpio != lookup_gpio_by_name("I2S-DI") // CHIP PRO
+       && gpio != lookup_gpio_by_name("PWM1") // CHIP PRO
        && !(gpio >= lookup_gpio_by_name("XIO-P0") && gpio <= lookup_gpio_by_name("XIO-P7"))) {
      PyErr_SetString(PyExc_ValueError, "Callbacks currently available on AP-EINT1, AP-EINT3, and XIO-P0 to XIO-P7 only");
      return NULL;
@@ -660,6 +668,9 @@ static PyObject *py_add_event_detect(PyObject *self, PyObject *args, PyObject *k
    // check to ensure gpio is one of the allowed pins
    if (gpio != lookup_gpio_by_name("AP-EINT3")
        && gpio != lookup_gpio_by_name("AP-EINT1")
+       && gpio != lookup_gpio_by_name("I2S-MCLK") // CHIP PRO
+       && gpio != lookup_gpio_by_name("I2S-DI") // CHIP PRO
+       && gpio != lookup_gpio_by_name("PWM1") // CHIP PRO
        && !(gpio >= lookup_gpio_by_name("XIO-P0") && gpio <= lookup_gpio_by_name("XIO-P7"))) {
      PyErr_SetString(PyExc_ValueError, "Edge Detection currently available on AP-EINT1, AP-EINT3, and XIO-P0 to XIO-P7 only");
      return NULL;
@@ -736,6 +747,9 @@ static PyObject *py_remove_event_detect(PyObject *self, PyObject *args)
    // check to ensure gpio is one of the allowed pins
    if (gpio != lookup_gpio_by_name("AP-EINT3")
        && gpio != lookup_gpio_by_name("AP-EINT1")
+       && gpio != lookup_gpio_by_name("I2S-MCLK") // CHIP PRO
+       && gpio != lookup_gpio_by_name("I2S-DI") // CHIP PRO
+       && gpio != lookup_gpio_by_name("PWM1") // CHIP PRO
        && !(gpio >= lookup_gpio_by_name("XIO-P0") && gpio <= lookup_gpio_by_name("XIO-P7"))) {
      PyErr_SetString(PyExc_ValueError, "Edge Detection currently available on AP-EINT1, AP-EINT3, and XIO-P0 to XIO-P7 only");
      return NULL;
@@ -840,6 +854,9 @@ static PyObject *py_wait_for_edge(PyObject *self, PyObject *args)
    // check to ensure gpio is one of the allowed pins
    if (gpio != lookup_gpio_by_name("AP-EINT3")
        && gpio != lookup_gpio_by_name("AP-EINT1")
+       && gpio != lookup_gpio_by_name("I2S-MCLK") // CHIP PRO
+       && gpio != lookup_gpio_by_name("I2S-DI") // CHIP PRO
+       && gpio != lookup_gpio_by_name("PWM1") // CHIP PRO
        && !(gpio >= lookup_gpio_by_name("XIO-P0") && gpio <= lookup_gpio_by_name("XIO-P7"))) {
      PyErr_SetString(PyExc_ValueError, "Edge Detection currently available on AP-EINT1, AP-EINT3, and XIO-P0 to XIO-P7 only");
      return NULL;

source/py_pwm.c

@@ -34,11 +34,29 @@ SOFTWARE.
 #include "common.h"
 #include "c_pwm.h"
 
-// python function cleanup()
-static PyObject *py_cleanup(PyObject *self, PyObject *args)
+// python function cleanup(channel)
+static PyObject *py_cleanup(PyObject *self, PyObject *args, PyObject *kwargs)
 {
-    // unexport the PWM
+    char key[8];
+    char *channel;
+    static char *kwlist[] = {"channel", NULL};
+
+    clear_error_msg();
+
+    // Channel is optional
+    if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|s", kwlist, &channel)) {
+        return NULL;
+    }
+
+    // The !channel fixes issues #50
+    if (channel == NULL || strcmp(channel, "\0") == 0) {
         pwm_cleanup();
+    } else {
+        if (!get_pwm_key(channel, key)) {
+            pwm_cleanup();
+        }
+        pwm_disable(key);
+    }
 
     Py_RETURN_NONE;
 }
@@ -395,7 +413,7 @@ PyMethodDef pwm_methods[] = {
     {"set_frequency", (PyCFunction)py_set_frequency, METH_VARARGS, "Change the frequency\nfrequency - frequency in Hz (freq > 0.0)" },
     {"set_period_ns", (PyCFunction)py_set_period_ns, METH_VARARGS, "Change the period\nperiod_ns - period in nanoseconds" },
     {"set_pulse_width_ns", (PyCFunction)py_set_pulse_width_ns, METH_VARARGS, "Change the period\npulse_width_ns - pulse width in nanoseconds" },
-    {"cleanup", py_cleanup, METH_VARARGS, "Clean up by resetting all GPIO channels that have been used by this program to INPUT with no pullup/pulldown and no event detection"},
+    {"cleanup", (PyCFunction)py_cleanup, METH_VARARGS | METH_KEYWORDS, "Clean up by resetting PWM channel(s) that have been used by this program to be disabled"},
     {"toggle_debug", py_toggle_debug, METH_VARARGS, "Toggles the enabling/disabling of Debug print output"},
     {"is_chip_pro", py_is_chip_pro, METH_VARARGS, "Is hardware a CHIP Pro? Boolean False for normal CHIP/PocketCHIP (R8 SOC)"},
     {NULL, NULL, 0, NULL}

source/py_softpwm.c

@@ -43,11 +43,29 @@ static PyObject *py_toggle_debug(PyObject *self, PyObject *args)
     Py_RETURN_NONE;
 }
 
-// python function cleanup()
-static PyObject *py_cleanup(PyObject *self, PyObject *args)
+// python function cleanup(channel)
+static PyObject *py_cleanup(PyObject *self, PyObject *args, PyObject *kwargs)
 {
-    // unexport the PWM
+    char key[8];
+    char *channel;
+    static char *kwlist[] = {"channel", NULL};
+
+    clear_error_msg();
+
+    // Channel is optional
+    if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|s", kwlist, &channel)) {
+        return NULL;
+    }
+
+    // The !channel fixes issues #50
+    if (channel == NULL || strcmp(channel, "\0") == 0) {
         softpwm_cleanup();
+    } else {
+        if (!get_key(channel, key)) {
+            softpwm_cleanup();
+        }
+        softpwm_disable(key);
+    }
 
     Py_RETURN_NONE;
 }
@@ -300,7 +318,7 @@ PyMethodDef pwm_methods[] = {
     {"stop", (PyCFunction)py_stop_channel, METH_VARARGS | METH_KEYWORDS, "Stop the PWM channel.  channel can be in the form of 'XIO-P0', or 'U14_13'"},
     {"set_duty_cycle", (PyCFunction)py_set_duty_cycle, METH_VARARGS, "Change the duty cycle\ndutycycle - between 0.0 and 100.0" },
     {"set_frequency", (PyCFunction)py_set_frequency, METH_VARARGS, "Change the frequency\nfrequency - frequency in Hz (freq > 0.0)" },
-    {"cleanup", (PyCFunction)py_cleanup, METH_VARARGS, "Clean up by resetting all GPIO channels that have been used by this program to INPUT with no pullup/pulldown and no event detection"},
+    {"cleanup", (PyCFunction)py_cleanup, METH_VARARGS | METH_KEYWORDS, "Clean up by resetting all GPIO channels that have been used by this program to INPUT with no pullup/pulldown and no event detection"},
     {"toggle_debug", py_toggle_debug, METH_VARARGS, "Toggles the enabling/disabling of Debug print output"},
     {"is_chip_pro", py_is_chip_pro, METH_VARARGS, "Is hardware a CHIP Pro? Boolean False for normal CHIP/PocketCHIP (R8 SOC)"},
     {NULL, NULL, 0, NULL}

test/integrations/spwmtest2.py

@@ -0,0 +1,45 @@
+#!/usr/bin/python
+
+import CHIP_IO.SOFTPWM as PWM
+import CHIP_IO.GPIO as GPIO
+import CHIP_IO.OverlayManager as OM
+import time
+import datetime
+
+if __name__ == "__main__":
+    # SETUP VARIABLES
+    PWMGPIO = "XIO-P7"
+    #PWMGPIO = "LCD-D4"
+    COUNT = 150
+    SLEEPTIME = 0.01
+
+    time.sleep(1)
+
+    # SETUP PWM
+    try:
+        print("PWM START")
+        #PWM.toggle_debug()
+        PWM.start(PWMGPIO, 50, 45, 1)
+
+        # UNCOMMENT FOR CRASH
+        print("PWM SET FREQUENCY")
+        PWM.set_frequency(PWMGPIO, 10)
+
+        # UNCOMMENT FOR CRASH
+        print("PWM SET DUTY CYCLE")
+        PWM.set_duty_cycle(PWMGPIO, 25)
+
+        #time.sleep(COUNT*SLEEPTIME + 1)
+        raw_input("PRESS ENTER WHEN DONE")
+
+    except:
+        raise
+    finally:
+        # CLEANUP
+        print("CLEANUP")
+        PWM.stop(PWMGPIO)
+        PWM.cleanup()
+        #OM.unload("PWM0")
+        #GPIO.cleanup()
+
+

test/test_lradc.py

@@ -0,0 +1,14 @@
+import pytest
+
+import CHIP_IO.LRADC as LRADC
+
+class TestLRADC:
+    def test_scale_factor(self):
+        assert LRADC.get_scale_factor() == 31.25
+        
+    def test_sample_rate_values(self):
+        assert LRADC.get_allowable_sample_rates() == (32.25, 62.5, 125, 250)
+
+    def test_set_sample_rate(self):
+        LRADC.set_sample_rate(32.25)
+        assert LRADC.get_sample_rate() == 32.25

test/test_pwm_setup.py

@@ -4,12 +4,15 @@ import time
 
 import CHIP_IO.PWM as PWM
 import CHIP_IO.OverlayManager as OM
+import CHIP_IO.Utilities as UT
 
 def setup_module(module):
+    if not UT.is_chip_pro():
         OM.load("PWM0")
 
 def teardown_module(module):
     PWM.cleanup()
+    if not UT.is_chip_pro():
         OM.unload("PWM0")
 
 class TestPwmSetup:
@@ -17,16 +20,6 @@ class TestPwmSetup:
     def setup_method(self, test_method):
         time.sleep(0.5)
 
-    #def teardown_method(self, test_method):
-    #    PWM.cleanup()
-        #OM.unload("PWM0")
-
-    #def setup_module(self, module):
-    #    OM.load("PWM0")
-
-    #def teardown_module(self, module):
-    #    OM.unload("PWM0")
-
     def test_start_pwm(self):
         PWM.start("PWM0", 0)
 
@@ -38,27 +31,25 @@ class TestPwmSetup:
         assert int(duty) == 0
         assert int(period) == 500000
 
-    @pytest.mark.xfail(reason="pwm cleanup is doing weirdness for this test")
     def test_start_pwm_with_polarity_one(self):
+        PWM.cleanup()
         PWM.start("PWM0", 0, 2000, 1)
 
         pwm_test = '/sys/class/pwm/pwmchip0/pwm0/'
 
-        #assert os.path.exists(pwm_test) == True
         duty = open(pwm_test + 'duty_cycle').readline().strip()
         period = open(pwm_test + 'period').readline().strip()
         polarity = open(pwm_test + 'polarity').readline().strip()
         assert int(duty) == 0
         assert int(period) == 500000
-        assert str(polarity) == "inverted"
+        assert str(polarity) == "inversed"
 
-    @pytest.mark.xfail(reason="pwm cleanup is doing weirdness for this test")
     def test_start_pwm_with_polarity_default(self):
+        PWM.cleanup()
         PWM.start("PWM0", 0, 2000, 0)
 
         pwm_test = '/sys/class/pwm/pwmchip0/pwm0/'
 
-        #assert os.path.exists(pwm_test) == True
         duty = open(pwm_test + 'duty_cycle').readline().strip()
         period = open(pwm_test + 'period').readline().strip()
         polarity = open(pwm_test + 'polarity').readline().strip()
@@ -66,13 +57,12 @@ class TestPwmSetup:
         assert int(period) == 500000
         assert str(polarity) == "normal"
 
-    @pytest.mark.xfail(reason="pwm cleanup is doing weirdness for this test")
     def test_start_pwm_with_polarity_zero(self):
+        PWM.cleanup()
         PWM.start("PWM0", 0, 2000, 0)
 
         pwm_test = '/sys/class/pwm/pwmchip0/pwm0/'
 
-        #assert os.path.exists(pwm_test) == True
         duty = open(pwm_test + 'duty_cycle').readline().strip()
         period = open(pwm_test + 'period').readline().strip()
         polarity = open(pwm_test + 'polarity').readline().strip()
@@ -90,11 +80,14 @@ class TestPwmSetup:
 
     def test_pwm_start_valid_duty_cycle_min(self):
         #testing an exception isn't thrown
+        PWM.cleanup()
         PWM.start("PWM0", 0)
+        PWM.cleanup()
 
     def test_pwm_start_valid_duty_cycle_max(self):
         #testing an exception isn't thrown
         PWM.start("PWM0", 100)
+        PWM.cleanup()
 
     def test_pwm_start_invalid_duty_cycle_high(self):
         with pytest.raises(ValueError):
@@ -143,7 +136,8 @@ class TestPwmSetup:
         assert int(period) == 500000
 
     def test_pwm_duty_cycle_non_setup_key(self):
-        with pytest.raises(RuntimeError):
+        with pytest.raises(ValueError):
+            PWM.cleanup()
             PWM.set_duty_cycle("PWM0", 100)
 
     def test_pwm_duty_cycle_invalid_key(self):
@@ -154,26 +148,31 @@ class TestPwmSetup:
         PWM.start("PWM0", 0)
         with pytest.raises(ValueError):
             PWM.set_duty_cycle("PWM0", 101)
+        PWM.cleanup()
 
     def test_pwm_duty_cycle_invalid_value_negative(self):
         PWM.start("PWM0", 0)
         with pytest.raises(ValueError):
             PWM.set_duty_cycle("PWM0", -1)
+        PWM.cleanup()
 
     def test_pwm_duty_cycle_invalid_value_string(self):
         PWM.start("PWM0", 0)
         with pytest.raises(TypeError):
             PWM.set_duty_cycle("PWM0", "a")
+        PWM.cleanup()
 
     def test_pwm_frequency_invalid_value_negative(self):
         PWM.start("PWM0", 0)
         with pytest.raises(ValueError):
             PWM.set_frequency("PWM0", -1)
+        PWM.cleanup()
 
     def test_pwm_frequency_invalid_value_string(self):
         PWM.start("PWM0", 0)
         with pytest.raises(TypeError):
             PWM.set_frequency("PWM0", "11")
+        PWM.cleanup()
 
     def test_pwm_freq_non_setup_key(self):
         with pytest.raises(RuntimeError):

test/test_utilities.py

@@ -0,0 +1,11 @@
+import pytest
+
+import CHIP_IO.Utilities as UT
+
+class TestUtilities:
+    def test_invalid_set_1v8_with_string(self):
+        assert not UT.set_1v8_pin_voltage("yaystring")
+
+    def test_invalid_set_1v8_with_outofbounds_value(self):
+        assert not UT.set_1v8_pin_voltage(0.5)
+        assert not UT.set_1v8_pin_voltage(4.5)