mirror of
https://github.com/xtacocorex/CHIP_IO
synced 2025-07-20 12:53:22 +00:00
338 lines
5.6 KiB
Markdown
338 lines
5.6 KiB
Markdown
## CHIP_IO.GPIO
|
|
Import the GPIO module as follows
|
|
|
|
```python
|
|
import CHIP_IO.GPIO as GPIO
|
|
```
|
|
|
|
### toggle_debug()
|
|
Enable/Disable the Debug
|
|
|
|
* Parameters
|
|
|
|
None
|
|
|
|
* Examples
|
|
|
|
```python
|
|
GPIO.toggle_debug()
|
|
```
|
|
|
|
### is_chip_pro()
|
|
Function to report to the calling script if the SBC is a CHIP or a CHIP Pro
|
|
|
|
* Parameters
|
|
|
|
None
|
|
|
|
* Returns
|
|
|
|
int - 1 for CHIP Pro, 0 for CHIP
|
|
|
|
* Examples
|
|
|
|
```python
|
|
is_chip_pro = GPIO.is_chip_pro()
|
|
```
|
|
|
|
### setmode(mode)
|
|
Dummy function to maintain backwards compatibility with Raspberry Pi scripts.
|
|
|
|
### setup(channel, direction, pull_up_down=PUD_OFF, initial=None)
|
|
Setup a GPIO pin. If pin is already configure, it will reconfigure.
|
|
|
|
* Parameters
|
|
|
|
channel - GPIO pin
|
|
direction - INPUT or OUTPUT
|
|
pull_up_down - PUD_OFF, PUD_UP, PUD_DOWN (optional)
|
|
initial - Initial value for an OUTPUT pin (optional)
|
|
|
|
* Returns
|
|
|
|
None
|
|
|
|
* Examples
|
|
|
|
```python
|
|
GPIO.setup("CSID0", GPIO.IN)
|
|
GPIO.setup("CSID3", GPIO.OUT, initial=1)
|
|
GPIO.setup("CSID2", GPIO.IN, GPIO.PUD_UP)
|
|
```
|
|
|
|
### cleanup(channel)
|
|
Cleanup GPIO. If not channel input, all GPIO will be cleaned up
|
|
|
|
* Parameters
|
|
|
|
channel - GPIO pin (optional)
|
|
|
|
* Returns
|
|
|
|
None
|
|
|
|
* Examples
|
|
|
|
```python
|
|
GPIO.cleanup()
|
|
GPIO.cleanup("CSID3")
|
|
```
|
|
|
|
### output(channel, value)
|
|
Write a value to a GPIO pin.
|
|
|
|
* Parameters
|
|
|
|
channel - GPIO Pin
|
|
value - HIGH, LOW, 0, 1
|
|
|
|
* Returns
|
|
|
|
None
|
|
|
|
* Examples
|
|
|
|
```python
|
|
GPIO.output("XIO-P7", GPIO.HIGH)
|
|
GPIO.output("XIO-P7", GPIO.LOW)
|
|
GPIO.output("CSID0", 1)
|
|
GPIO.output("CSID0", 0)
|
|
```
|
|
|
|
### input(channel)
|
|
Read a GPIO pin once.
|
|
|
|
* Parameters
|
|
|
|
channel - GPIO Pin
|
|
|
|
* Returns
|
|
|
|
value - current value of the GPIO pin
|
|
|
|
* Examples
|
|
|
|
```python
|
|
value = GPIO.input("XIO-P7")
|
|
```
|
|
|
|
### read_byte(channel)
|
|
Read a GPIO pin multiple times to fill up 8 bits.
|
|
|
|
* Parameters
|
|
|
|
channel - GPIO Pin
|
|
|
|
* Returns
|
|
|
|
int - 8 bit value of the GPIO pin
|
|
|
|
* Examples
|
|
|
|
```python
|
|
bits = GPIO.read_byte("XIO-P7")
|
|
```
|
|
|
|
### read_word(channel)
|
|
Read a GPIO pin multiple times to fill up 16 bits.
|
|
|
|
* Parameters
|
|
|
|
channel - GPIO Pin
|
|
|
|
* Returns
|
|
|
|
word - 16 bit value of the GPIO pin
|
|
|
|
* Examples
|
|
|
|
```python
|
|
bits = GPIO.read_word("XIO-P7")
|
|
```
|
|
|
|
### add_event_detect(channel, edge, callback=None, bouncetime=0)
|
|
Add event detection to a pin. Refer to main table for which pins are able to use edge detection.
|
|
|
|
* Parameters
|
|
|
|
channel - GPIO Pin
|
|
edge - edge: RISING_EDGE, FALLING_EDGE, BOTH_EDGE
|
|
callback - callback function to be run when edge is detected (optional)
|
|
bouncetime - level debounce time period in ms (optional)
|
|
|
|
* Returns
|
|
|
|
None
|
|
|
|
* Examples
|
|
|
|
```python
|
|
GPIO.add_event_detect("XIO-P7", GPIO.RISING_EDGE)
|
|
GPIO.add_event_detect("AP-EINT3", GPIO.RISING_EDGE, mycallback)
|
|
GPIO.add_event_detect("XIO-P7", GPIO.FALLING_EDGE, bouncetime=30)
|
|
GPIO.add_event_detect("XIO-P7", GPIO.RISING_EDGE, mycallback, 45)
|
|
```
|
|
|
|
### remove_event_detect(channel)
|
|
Remove a pins event detection. Refer to main table for which pins are able to use edge detection.
|
|
|
|
* Parameters
|
|
|
|
channel - GPIO Pin
|
|
|
|
* Returns
|
|
|
|
None
|
|
|
|
* Examples
|
|
|
|
```python
|
|
GPIO.remove_event_detect("XIO-P7")
|
|
```
|
|
|
|
### event_detected(channel)
|
|
Function to determine if an event was detected on a pin. Pin must have an event detect added via add_event_detect() prior to calling this function. Refer to main table for which pins are able to use edge detection.
|
|
|
|
* Parameters
|
|
|
|
channel - GPIO Pin
|
|
|
|
* Returns
|
|
|
|
boolean - True if event was detected
|
|
|
|
* Examples
|
|
|
|
```python
|
|
have_event = GPIO.event_detected("XIO-P5")
|
|
```
|
|
|
|
### add_event_callback(channel, callback, bouncetime=0)
|
|
Add callback function to a pin that has been setup for edge detection. Refer to main table for which pins are able to use edge detection.
|
|
|
|
* Parameters
|
|
|
|
channel - GPIO Pin
|
|
callback - callback function to be run when edge is detected
|
|
bouncetime - level debounce time period in ms (optional)
|
|
|
|
* Returns
|
|
|
|
None
|
|
|
|
* Examples
|
|
|
|
```python
|
|
GPIO.add_event_callback("AP-EINT3", mycallback)
|
|
GPIO.add_event_callback("XIO-P7", mycallback, 45)
|
|
```
|
|
|
|
### wait_for_edge(channel, edge)
|
|
Wait for an edge to be detected. This is a blocking function. Refer to main table for which pins are able to use edge detection.
|
|
|
|
* Parameters
|
|
|
|
channel - GPIO Pin
|
|
edge - edge: RISING_EDGE, FALLING_EDGE, BOTH_EDGE
|
|
|
|
* Returns
|
|
|
|
None
|
|
|
|
* Examples
|
|
|
|
```python
|
|
GPIO.wait_for_edge("XIO-P3", GPIO.RISING_EDGE)
|
|
GPIO.wait_for_edge("AP-EINT3", GPIO.BOTH_EDGE)
|
|
GPIO.wait_for_edge("I2S-DI", GPIO.FALLING_EDGE)
|
|
```
|
|
|
|
### gpio_function(channel)
|
|
Function to report get a GPIO Pins directioj
|
|
|
|
* Parameters
|
|
|
|
channel - GPIO Pin
|
|
|
|
* Returns
|
|
|
|
int - GPIO Pin direction
|
|
|
|
* Examples
|
|
|
|
```python
|
|
funct = GPIO.gpio_function("CSID0")
|
|
```
|
|
|
|
### setwarnings(state)
|
|
Function to enable/disable warning print outs. This may or may not work properly. toggle_debug() is a better bet.
|
|
|
|
* Parameters
|
|
|
|
state - 1 for enable, 0 for disable
|
|
|
|
* Returns
|
|
|
|
None
|
|
|
|
* Examples
|
|
|
|
```python
|
|
GPIO.set_warnings(1)
|
|
```
|
|
|
|
### get_gpio_base()
|
|
Function to get the SYSFS base value for the XIO pins on a CHIP
|
|
|
|
* Parameters
|
|
|
|
None
|
|
|
|
* Returns
|
|
|
|
int - sysfs base of the XIO, returns -1 on a CHIP Pro
|
|
|
|
* Examples
|
|
|
|
```python
|
|
base = GPIO.get_gpio_base()
|
|
```
|
|
|
|
### selftest(value)
|
|
Function to perform a selftest on the GPIO module
|
|
|
|
* Parameters
|
|
|
|
value - a value
|
|
|
|
* Returns
|
|
|
|
int - the input value
|
|
|
|
* Examples
|
|
|
|
```python
|
|
rtn = GPIO.selftest(0)
|
|
```
|
|
|
|
### direction(channel, direction)
|
|
Function to set the direction of an exported GPIO pin
|
|
|
|
* Parameters
|
|
|
|
channel - GPIO Pin
|
|
direction - Direction Pin is to take
|
|
|
|
* Returns
|
|
|
|
None
|
|
|
|
* Examples
|
|
|
|
```python
|
|
GPIO.set_direction("XIO-P0", GPIO.OUT)
|
|
GPIO.set_direction("XIO-P1", GPIO.IN)
|
|
```
|
|
|
|
[home](./index.md)
|